Introducing
Black Magic
For hoof trimmers that want to trim cows!
What is Black Magic?
Shu-Fix Black Magic, a revolutionary dark adhesive with super strength, especially developed for professional use on cattle to glue wooden, plastic or rubber blocks underneath claws.
We are proud to announce that we created an adhesive that became MAGICAL in its use. With experience producing adhesives for 2 decades and combined careful fine-tuning, Black Magic has proven it is a failure proof formulation. Built in rapid etching, curing and hardening, Black Magic is the most economical time saving adhesive in today’s market. Glued block can be left alone after 20 seconds and glue connection can bear animal's full weight after 90 seconds!
shufix
Black Magic
Winter
Version
When used under the harshest conditions this adhesive is able to maintain its magical characteristic’s.
- Fast curing polyurethane adhesive with a guaranteed solid adhesion.
- Block has to be applied within 15 seconds to not disturb the curing process.
- Setting time: After 90 seconds glue is cured and ready to bear weight.
- Very low heat development during setting of the glue.
- No chemical smell during application.
- Use in combination with the magic glue heater and novelty Black magic hoof block optimum results!
Advised temperature range for optimum use: below 50°F.
shufix
Black Magic
Summer
Version
When used under the warmer conditions this adhesive is able to maintain its magical characteristic’s. when the ambient temperature rises its magic performance rises with it.
- Fast curing polyurethane adhesive glue with a guaranteed solid adhesion.
- Block has to be applied within 15 seconds to not disturb the curing process.
- Setting time: After 90 seconds glue is cured and ready to bear weight.
- Very low heat development during setting of the glue.
- No chemical smell during application.
- Use in combination with the novelty Black magic hoof block for the best results!
Advised temperature range for optimum use: above 60°F
Particularities
Store the tube upright and hold the tube upright when opening.
Press the glue slowly until the mixer tip is filled halfway, with the tip pointing upward.
The remaining air will move away from the tube.
Slowly apply the glue in a fluid pump movement to the claw or the claw block.
Expiry: un-opend tubes: 1 Year when stored under the advised conditions.
Advisable storage temp. range: between 60°F and 80°F.
Where to buy
For more information or to get in contact with us, please mail us